Replacing rear seat belt buckles
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fold the seat cushion forward.
Remove the nuts. Remove the seat belt buckle.
NOTE:
The mounting for the center belt is secured with a washer under the support on the left striker plate.
Install in reverse order.
Clean the mounting.
Apply locking fluid to the weld screws.
Tighten the nuts. Tighten to 48 Nm .