Installing the B-post seat belt tensioner
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Clean the mounting holes
- Install the seat belt using new screws
- Ensure that the rod is in the bracket
- Tighten the two screws to 48 Nm
- Connect the connector to the seat belt tensioner
- Install the B-post panel according to Upper B-post panel .
- Connect the battery negative terminal
- Switch on the ignition
- Enter the anti-theft radio code.