Installing the passenger airbag module
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The passenger airbag module must be handled according to the instructions. See Handling non-deployed airbag modules/pyrotechnic seat belt tensioners .
Carefully position the passenger airbag module in the dashboard.
Install:
- the two screws. Tighten to 9 Nm
- the ventilation pipe with four screws
- the green connector for the passenger airbag module.
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed passenger airbag module. The passenger airbag module may be deployed.