Replacing seat belt buckles
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear center console. See Center console panels
- Move the seat to the rearmost position
- Remove the mounting for the seat belt buckle. Disconnect the wiring
- Clean the mounting
- Install the new seat belt buckle. Tighten to 48 Nm
- Install the rear center console
- Note: for the passenger side, cut the wiring to the shortest possible length.