Installing the dashboard bracket and the hood catch

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Latch And Wiring

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the two connectors from the cable harness for the dashboard
the blue and brown connectors from the dashboard cable harness
the bracket and install the upper screw by hand
the hood catch and the three screws. Tighten to 10 Nm
the cable from the hood catch
the cable harness clips in the dashboard
the screw for the dashboard in the bracket (A)
The central electronic module (CEM) according to Replacing central electronic module (CEM) .