Installing the dashboard bracket and the hood catch

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Latch And Wiring

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the bracket and install the upper screw by hand
the hood catch and two screws
the screw for the dashboard in the bracket.

Tighten the screws and nuts for the console. Tighten to 10 Nm .

Tighten the dashboard screw (A). Tighten to 12 Nm . Install the plug.