LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Climate Units - Removal, Replacement And Installation (644 Body)) >> Replacing Components. Additional Heater (2000-2004) >> Replacing Fuel Injection Nozzle, Fan Motor And Nozzle Pipe >> Removing >> Nozzle Pipe

Nozzle Pipe

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Opening Mountings Around Nozzle Pipe By Tapping Them Using A Hammer And Screwdriver
GLL102407Courtesy of VOLVO CARS OF NORTH AMERICA.

Open the mountings around the nozzle pipe by tapping them carefully using a hammer and screwdriver.

Open the mountings just enough to remove the nozzle pipe.

Remove the nozzle pipe.