Heat Exchanger And Glow Plug
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Assemble the fan shroud and combustion unit with the heat exchanger.
Center socket for the glow plug in the flame shield with the mounting on the heat exchanger.
Install:
- glow plug in the heat exchanger.
NOTE:
If the glow plug can be screwed in by hand the glow plug socket in the flame shield has been centered correctly. Torque to 15 Nm
.
- glow plug cable.
- cap over the terminal.