The Pipe Between the Swivel Connection And the Receiver Drier On the Firewall
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Removal
- Disconnect the connections. Seal the openings
- Clean all mating surfaces
- Lubricate the O-rings with compressor oil
- Remove the swivel on the bulkhead. Turn only the swivel. Counterhold the pipe with a wrench (the nut is welded)
- Carefully pull the oil pipe out of the clamps. Remove the pipe.