Fan Motor: Installation

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Check the seals.

Install the motor using a twisting movement.

Install three screws.

Connect the connector for the blower fan motor.

If the car is equipped with an alarm: install "the ultrasonic and glass breakage control modules" and the screw.

Install the insulation panel and secure it with tape.

Check the function.

Install the soundproofing panel on the passenger side according to Passenger Side Soundproofing .