Fitting the Rear Brake Disc
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Exercise care when handling the new brake disc. Careless handling could result in damage, such as skewness.
Fit the new brake disc on the hub. Tighten the retaining bolt to 5 Nm .
Fit
- the caliper holder assembly, including the caliper; use new bolts. Tighten to 55 Nm .
- the brake pads, see Brake Pads Rear, Installing .
Check the parking brake as necessary, see Adjusting the Parking Brake .
Fit the wheel, see Wheels, Installing .