Installing wheel hub
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Clean the stub axle and the hub.
Position the hub on the wheel spindle.
Install a new nut.
- Tightening torque:
- -'97 175 Nm.
- '98- 1 stage 120 Nm.
2 stage + 30° turn
Install
- the hub cap
- the brake disc and caliper, see Fitting the rear brake disc .
- the wheel, see Wheels, installing .