Tightening the stub axle/installing the ABS and brake lines

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Engine Splash Guards

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

New lock nuts stub axle-spring strut.
Tightening torque: 90 Nm
The ABS line on the wheel arch and spring strut
The brake hose with the mounting clip on the spring strut.