Installing, continued
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installing Oil Dipstick Pipe, Bracket With Transmission Connectors & Ground Lead To Transmission
Lower the car.
Tighten the return oil pipe cap nut on the control system cover.
Install:
- The oil dipstick pipe with a new O-ring.
Tightening torque: 25 Nm
- The bracket with the transmission connectors. Connect all the connectors. Secure the wiring from the control system in the bracket
- The ground lead to the transmission (clean).