Installing the transmission-engine screws

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Upper Transmission Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

The other transmission-starter motor screws (two screws)
Tightening torque: 50 Nm
The other transmission-engine screws (three screws).
Tightening torque: 50 Nm .

NOTE: The two screws holding the bracket for the engine coolant hose.
Clamp the engine coolant hose to the bracket.