LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Transmission - Removal, Replacement And Installation (644 Body)) >> Replacing The Primary Shaft Seal (B4204T3, M56; 2004) >> Replacing the primary shaft seal >> Installation >> Install the rubber pipe seal in the clutch cover

Install the rubber pipe seal in the clutch cover

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rubber Seal For Pipe In Clutch Cover
GLL109086Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal locates all the way around.

NOTE: Follow-up work: To install the transmission, see Transmission, installing .


Fig 1: Identifying Rubber Seal For Pipe In Clutch Cover
GLL109086Courtesy of VOLVO CARS OF NORTH AMERICA.

Ensure that the rubber seal locates all the way around.

NOTE: Follow-up work: To install the transmission, see Transmission, installing (M56; 2004) .
scientia non olet · About LEMON Manuals