Opening control system: Preparations
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- Battery
- Battery shelf
- Oil pipe cap nut on the control system cover.
Raise the car.
Remove splash guards under engine and left wheel arch splash guard.
Drain transmission oil. Reinstall oil pan plug with a new seal. Tightening torque: 40 Nm .
Disconnect oil pipes and push to one side.
Seal all openings with plastic plugs.