Replacing lock function: Installing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pawl, Push Rod And Spring

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the lower section of the push rod and spring with grease 1161417-9.

Install spring and push rod (4).

Press down push rod and install pawl (1) with new O-rings in the gear selector.

Lubricate pawl segment with grease 1161417-9.

Install:

Center console according to Installing center consoles .
Gear selector knob according to Installing gear selector knob and boot .
Battery negative lead.

Set the clock and anti-theft radio code.