Removing gear selector assembly
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect transmission cable from gear selector assembly.
Use flat-nosed pliers to remove cable pin.
Remove retaining clip securing cable sleeve to gear selector assembly.
Remove:
- Gear selector assembly screws (four)
- Cable harness clips (from behind). Split connectors
- Gear selector assembly.
CAUTION:
Take care not to bent the transmission cable.