Replacing the control system: Preparations

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Remove according to Replacing the cable harness for the control system .

Fig 1: Identifying Oil Temperature Sensor And Holder Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the connectors for the solenoid valves
the screw for the oil temperature sensor holder. Remove the sensor from the control system
the cable harness from the holders on the control system.

Push the cable harness to one side.