Replacing the cable harness for the control system: Removal: Preparations

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Compartment Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: When removing the battery lead, see Note when disconnecting and connecting the battery lead .

Remove:

the air cleaner (ACL) housing, the intake manifold and the battery according to Removing The Air Cleaner (ACL) Housing
the battery shelf.

Fig 2: Removing/Installing Transmission Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

separate the 6--pin connector and the 8-pin connector for the cable harness
slacken off the cap nut for the oil pipe on the control system cover.