Resetting contact reel
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
If the locking screw is not in the lock position as shown in the illustration, the contact reel must be reset. For resetting see Resetting contact reel .
NOTE:
A new contact reel is zeroed at the factory and supplied with the locking screw installed.
Zeroed means that the steering wheel can be turned to full lock in either direction without damaging the contact reel.