Removing the SRS control module
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
The battery must not be connected when the control module is being removed or installed.
Remove:
- panels and cover. Removing panels and cover .
- the screws and connectors. Removing screws and connectors .
- 1 bracket screw and push the bracket and connectors to one side.
- 1 control module cover.
- 3 Torx 30 control module screws.
- 1 screw for the connector.
- lift up the control module.