Fitting the rear light unit
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Check the rubber seal.
- Clean the rear light unit and the tailgate.
- Fit the rear light unit and tighten the bolts (10) finger tight.
- HINT: Check and fit the rubber seal when fitting the rear light unit.
Tighten the bolts to 7.5 Nm . Start in the center.
- Plug in the white connector.
- Check the function of the rear lights
- Fit the rear panel, see Installing the panel .