Adjusting rods
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Turn lock and then unlock again.
- Push block out of clamp and adjust rod.
- Remove the blocking device.
- Position the rod in the adjuster.
- Press the blocking device in.
Pull rod A:
- Remove rod out of clip.
- Position the lock and press the shaft in.