Installing trunk/tailgate switch
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Install connectors.
- Position lock.
- Install the (3x) bolts (A ), tighten to 10 Nm.
- Install the connecting rod in the lock (push locating pin in position).
NOTE:
Adjust rod if necessary and check the trunk/tailgate switch.
- Install boot lid cover (S40), see Removing/installing boot lid cover .
- Install tailgate cover (V40), see Removing/fitting the tailgate insulation .