VGLA-control module alarm and lock: Preparations
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Before replacing the control module, it is important to read out how the old control module is programmed. This is done in VIDA vehicle communication under the heading Reading programmed values. Read out and note programmed values. After replacing, program the relevant data in the new control module. If the values cannot be read out, consult your closest supervisor/sales company/customer so that the new control module is configured the same as the old control module.
Prepare the car according to Removal .