Installing control module

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ultrasonic Or Glass Breakage Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

Position control module and mount the screws (2x).
Install connectors.
Install cover on passenger side.
Turn ignition key to position II.
Mount battery ground lead.
Always read the diagnostic trouble codes in the VGLA alarm system.