Replacing receiver

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Receiver

GLL116718

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

Remove combined instrument, see Driver information module (DIM), installation/removal, component replacement .
Remove screws (2x) and turn the receiver out of the dashboard.
Remove blue (BL) connector.

Install:

Attach blue (BL) connector.
Position receiver and install screws (2x).
Install combined instrument, see Driver information module (DIM), installation/removal, component replacement .
The receiver is connected to the VGLA electrical system and requires a software program unique to the car.