LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> XC70 >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Drive Shaft Seal (Right), Turbocharger - Removal & Installation) >> Engine >> Replacing The Wiring Harness / Oil Temperature Sensor >> Removal >> Removing The Cable Harness

Removing The Cable Harness

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Temperature Sensor Holder Screw
GLL109393Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

Remove the cable harness.