Installing The Lifting Beam And Lifting Hook

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Lifting Beam And Lifting Hook Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install lifting beam 9995716 directly above the engine lifting eye. Position the lifting beam brackets as shown in the illustration.

Connect hook 9995460 to the lifting eye at the rear edge of the engine. Apply the hook to take the load off the engine pads.