Rear Brake Disc: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2004 Volvo S80, 2004 Volvo S60, 2003 Volvo S80, 2003 Volvo S60, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.
- Install the brake disc and tighten the locating pin to specification. See TORQUE SPECIFICATIONS .
- Install the caliper holder. Use NEW mounting bolt. Tighten to specification. See TORQUE SPECIFICATIONS .
- Install the brake pads and brake caliper.
- Install the locating pins in the brake caliper.
- Depress the brake pedal a few times. Check the fluid level in the brake fluid reservoir. Top off if necessary.
- Adjust parking brake. See PARKING/EMERGENCY BRAKE under ADJUSTMENTS.
- Install wheels and tighten to specification. See TORQUE SPECIFICATIONS .
NOTE:
Manufacturer recommends using new caliper holder mounting bolts during installation.