LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> V70 Base, 2.4 64 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Brake Pipe And Connections (2001-2003) >> Brake pipe, rear wheel, replacing >> Replacing the brake pipe for the right rear wheel >> Install the cross members and heat shield

Install the cross members and heat shield

Fig 1: Central Cross Member Heat Deflector Screws
GLL104806Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull back the rear heat deflector to line up with the holes.

Blind rivet the heat deflector to the cross member

Install the screws, nuts and heat deflector on the rear cross member. Tighten all screws and nuts to 25 Nm  .

Remove the pedal jack.

Fill and bleed the brake system 

See Brake system, bleeding (using bleeding unit)

Pressure test the brake system 

See

scientia non olet · About LEMON Manuals