Connecting the T pipe

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Deactivate the function for STC/DSTC by pressing in the button for STC/DSTC for approximately 2 seconds
Ignition off
Connect T-pipe 9997002 with oil pressure gauge 9995114 to the coolant hose from the gearbox for the oil cooler
Raise the vehicle so that the drive wheels hang freely.
WARNING:
Ensure that the vehicle is safely raised and that there are no objects caught in the front wheels.
Start the engine.
Gear selector in position P
Activate the function "Block automatic shifting".
Other information
- See T-pipe, connecting to oil cooler
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Allow the engine to run. Proceed to Continue.