Checking the power supply to the control module

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Control Module Disconnected

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Control module disconnected.
• Ignition on.

  Connect a voltmeter between terminals #A35 (#A35) and #A53 (#A53) on the breakout box.

  Fig 3: Identifying Breakout Box

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Voltage Display

  Courtesy of VOLVO CARS OF NORTH AMERICA.

The voltmeter should read battery voltage. 

• OK 

  OKAY:  Troubleshooting has been completed.

• NOT OK 

  Refer to Checking the fuse and relay