Checking the fuse and relay
Check that fuse 20 in the fusebox in the passenger compartment is intact.
If the fuse has blown, check the cable between control module terminal #A35 (#A35) and the relay for extended X-supply 2/101 terminal #1 (located on the central electronic module (CEM). Check for a short-circuit to ground.
Other information:
- To connect the breakout box and access the relay, see Central electronic module (CEM), replacing
- See Checking wiring and terminals
Was a fault detected?
- YES
Refer to Verification
- NO
Refer to Checking the voltage before the fuse