Installing the transmission cable bracket on the transmission and the cable on the lever

Fig 1: Identifying Transmission Cable At Lever And Cable Bracket Screws On Transmission

Courtesy of VOLVO CARS OF NORTH AMERICA.

Tighten with 25 Nm  .

Install: 

• the large connector. Lock it into place
• the bracket with the oil pipe. Press the dip stick pipe into place in the transmission oil pipe
• the two cable conduit nuts. Tighten to 10 Nm 
• the connector furthest in at the cable conduit
• the oil pipe on the transmission. Tighten to 25 Nm  .