Installing the dip stick pipe and oil hose on the oil cooler. Install the 3 screws for the transmission

Fig 1: Identifying Lower Transmission Oil Cooler Hose, Dipstick Pipe, And Transmission Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the lower oil cooler hose on the transmission. Tighten to 10 Nm 
• the dip stick pipe in the transmission. Tighten to 10 Nm 
• the screws for the transmission. Tighten the two larger screws. Tighten to 50 Nm  . Tighten the smaller screw. Tighten to 25 Nm  .