LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission & Gear Selector Assembly - Cleaning, Inspection And Adjustment >> Transmission, Automatic (B5254T2, Aw55-50/51SN; 2004) >> Oil grade, checking >> Removing the transmission >> Removing the drive shaft from the wheel spindle (right-hand side)

Removing the drive shaft from the wheel spindle (right-hand side)

Fig 1: Identifying Removal Of Wheel Spindle From Control Arm
GLL109807Courtesy of VOLVO CARS OF NORTH AMERICA.

Take hold of the drive shaft. Pull it down towards the control arm so that it does not tension.

Pull the brake disc outwards. At the same time, pull on the constant velocity joint towards the transmission so that the drive shaft loosens.

Allow the drive shaft to lie on the control arm.

scientia non olet · About LEMON Manuals