High stalling speed

The test conditions described in Check  above, have been met. Is acceleration from 0-100 km/h normal?

If the stalling speed recorded exceeds the normal value by more than 300 RPM: 

Check if the oil is discolored or smells burnt. See Oil grade, checking .

If the oil is OK, replace the torque converter. 

For gasoline engines see Gearbox, removing and Installing the gearbox .

Dirty oil indicates worn or burnt clutch plates. Replace the transmission. 

For gasoline engines see Gearbox, removing and Installing the gearbox .

Check the stalling speed again after replacing the transmission.