Removing the bumper cover, air baffles and combustion preheater module (CPM)

Remove the bumper cover. See Casing, bumper front, replacing .

Fig 1: Identifying Air Duct Cover And Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the air baffles on the left-hand side and on certain versions also on the right-hand side
• the air baffle in the center.

Fig 2: Identifying Combustion Preheater Module (CPM) Connector & Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

• the combustion preheater module (CPM) from the mounting by slackening off the screws
• the connector from the control module.