Pipes/Hoses, Replacing: Pipes/hoses: Hose

Fig 1: Identifying Hose/Pipe From Member To Compressor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the hose/pipe from the member to the compressor
• the pipe from the receiver to the expansion valve: Remove it from the mounting at the junction point
• the pipe from the member at the pipe coupling.

Detach the pipe at the expansion valve

Fig 2: Identifying Pipe Above Front Cover Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Position the front section of the pipe above the front cover plate.
• Pull the rear of the pipe upwards and outwards. Remove the pipe.