Pipe/hose, compressor, replacing: Removal

Fig 1: Identifying Control Module Box Air Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove

the air pipe at the control module box
the hose clamp and charge air pipe/hose on the right-hand side (turbocharged engines only ). If necessary, use a hot air gun to make removal easier.

Fig 2: Identifying Pipe And Hose Between Compressor And Condenser

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Cooler Unit Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Air Baffle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Work under the car

Fig 5: Identifying Lower Mounting For Air Conditioning Aggregate

Courtesy of VOLVO CARS OF NORTH AMERICA.

The lower mounting for the air conditioning aggregate

Fig 6: Lowering Air Conditioning Aggregate On Left-Hand Side

Courtesy of VOLVO CARS OF NORTH AMERICA.

Slightly lower the air conditioning aggregate on the left-hand side. This is to access the screw.

Remove

the screw from the hose/pipe coupling between the compressor and the condenser. Use a claw wrench
the hose from the catch on the condenser. Carefully push the hose to one side.