Installing the condenser

Fill oil in the condenser, see Oil air conditioning (A/C) System, Filling .

Install the condenser with the 2 x M6 lower mounting screws. Tighten.

Guide the left-hand A/C pipe into place to the condenser connection and secure with the clip

Install: 

• the right-hand A/C pipe with the screw, 1 x M6, and tighten
• the pressure sensor and tighten
• the connector.

Raise the vehicle.

Install: 

• the condenser's upper mountings, 2x M6, and tighten
• the left-hand A/C pipe, 1x M8, and tighten
• left-hand headlight, see Headlamp/bulb, replacing .