Condenser, replacing: Installation

Installing the condenser 

Fill oil in the condenser, see Oil air conditioning (A/C) system, filling .

Install the condenser with the 2 x M6 lower mounting screws. Tighten.

Guide the left-hand A/C pipe into place to the condenser connection and secure with the clip

Install: 

• the right-hand A/C pipe with the screw, 1 x M6, and tighten
• the pressure sensor and tighten
• the connector.

Raise the vehicle.

Install: 

• the condenser's upper mountings, 2x M6, and tighten
• the left-hand A/C pipe, 1x M8, and tighten
• left-hand headlight, see Headlamp/bulb, replacing .

Installing the condenser 

Fill oil in the condenser, see: Oil air conditioning (A/C) system, filling .

Install the condenser with the 2 x M6 lower mounting screws. Tighten.

Guide the left-hand A/C pipe into place to the condenser connection and secure with the clip

Install: 

• the right-hand A/C pipe with the screw, 1 x M6, and tighten
• the pressure sensor and tighten
• the connector.

Applies to the V70R 

Install the extra intercooler using the screws, 2 x M6.

Applies to all vehicles 

Raise the vehicle.

Install: 

• the condenser's upper mountings, 2 x M6, and tighten
• the left-hand A/C pipe, 1 x M8, and tighten
• left-hand headlight, see Headlamp/bulb, replacing .

Installing the condenser 

Fill the condenser with oil. See Oil air conditioning (A/C) system, filling .

Install the condenser with the 2 lower retaining screws (M6). Tighten.

Guide the left AC pipe into place against the condenser connection and fasten with the clip.

Install: 

• the right AC pipe with the 1 M6 screw and tighten.
• the pressure sensor and tighten
• the connector.

For S60R 

Install the auxiliary charge air cooler with the 2 M6 screws.

Applies to all vehicles. 

Raise the vehicle.

Install: 

• the condenser's 2 upper mountings (M6) and tighten
• the left AC pipe (1 M8) and tighten
• the left headlight. See Headlamp/bulb, replacing .