Receiver drier, replacing: Removal

Removing the drier filter 

Fig 1: Identifying Drier Filter Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the drier filter screw on the underside (1) and the screw at the service valve (2).

Carefully bend up the drier filter from the connection on the condenser (3) using a slotted screwdriver.

Removing the drier filter 

Fig 1: Identifying Drier Filter Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the drier filter screw on the underside (1) and the screw at the service valve (2).

Carefully bend up the drier filter from the connection on the condenser (3) using a slotted screwdriver.

Removing the dryer filter 

Fig 1: Identifying Drier Filter Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screw (1) on the bottom of the dryer filter and the screw at the service valve (2).

Use a slotted screwdriver to carefully bend the dryer filter up from the connection on the condenser (3).