Receiver drier, replacing: Installation

NOTE: For tightening torques, see: Tightening torque .

Installing the drier filter

NOTE: Always plug the pipes and connections when working on the climate control system.

NOTE: Use new O-rings lubricated with compressor oil.

Install:

the dryer filter with the screw, 1 pc., from underneath acc. to Summary of tightening torques for specific components
screw by the service valve, 1 pc. and tighten acc. to Summary of tightening torques for specific components
the condenser, see Condenser, replacing .

NOTE: For tightening torques, see Tightening torque .

Installing the drier filter

NOTE: Always plug the pipes and connections when working on the climate control system.

NOTE: Use new O-rings lubricated with compressor oil.

Install:

the dryer filter with the screw, 1 pc., from underneath acc. to Summary of tightening torques for specific components
screw by the service valve, 1 pc. and tighten acc. to Summary of tightening torques for specific components
the condenser, see Condenser, replacing .

NOTE: For tightening torques, see Tightening torque .

Installing the dryer filter

NOTE: Always plug the pipes and connections when working on the climate control system.

NOTE: Use new O-rings lubricated with compressor oil.

Install: