Checking the components

• Check that relay for "Reversing lamp" (location 2/80) is correctly installed.
• Do the necessary corrective action.

  Activate the reversing lamps by pressing TO and FROM a few times.

  Additional information: 

  • For -2003, see Signal specification
  • For 2004, see Signal specification
  • To access/replace the relay, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing
  • When relay is installed and not activated, relay control voltage should be 12 V.
  Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 2: Identifying Relays

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Do the reversing lights work? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Replacing the component