Checking components and wiring

Check the signal cable between fuel temperature level sensor connector terminal #1 and rear electronic module #A2 (#A02). Check for a short-circuit to ground.

Check the signal cable between fuel temperature level sensor connector terminal #2 and rear electronic module #A10 (#A10). Check for a short-circuit to ground.

Check the connector for the fuel level sensor. Check for damage.

Remedy as necessary.

Other information: 

• To fault-trace wiring and terminals, see Checking wiring and terminals
• To connect the breakout box, see Connecting the breakout box
• For -2003, see Signal specification
• For 2004, see Signal specification

Was a fault detected? 

• YES 

  Refer to Verification 

• NO 

  Refer to Replacing the component