Checking the cable

Check the cable between central electronic module (CEM) terminal #14A and windshield wiper relay 2/90 terminal #2. Check for an open-circuit.

Also check the connector. Check for an open-circuit.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box
• -2004: Signal specification
• 2005-: Signal specification
• See Checking wiring and terminals

Fig 2: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Ohm Meter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Verification